Below are pictures of our Steam Genie replacement Heat Exchanger Kit for
Steam Genie Truck Mounts. Our Exchangers are all Stainless -
Shell and Tube design as described for our regurlar heat exchangers.
Below is the Stainless Header that connects to the exhaust header of the Steam Genie Truck Mount
The Photos below are courtesy of Matt King - Advanced Cleaning Systems
Matt
purchased one of our blower post/pre heaters to increase his water
temperature on his Steam Genie PTO. Our blower exchangers have a
Stainless Housing with copper inner tubes. They can be used as
either a pre or post heater from the blower. ...
"If
anyone here has a Steam Genie pto or another direct drive without a
blower heat exchanger I would recommend buying one from John at Hot Heat
Exchangers! This was my second day back to work with my new blower
exchanger installed on my S.G. pto and I was getting 235-245 degree
water coming out of the machine all day long. It is only 40 degrees
outside and I was running a 2 jet wand with 9502's at 500 psi., cold
water only coming into the machine. With the wand keyed open constantly
it would not drop below 225. I'm very impressed with his exchangers!
Actually
I ran this after the coolant exchangers. So it's a post heater but ya,
these things are awesome! I'm not sure why they didn't put these on from
the factory."
Blower Pre or Post Heater
Comments from Matt:
for Steam Genie Truck Mounts
for PTOs
Our specialty welder completing an order of exhaust diverter valves for a manufacturer